4
GB Contents - Original User Manual
GB Contents - Original User Manual .................................... 4
Fitting.................................................................................... 4
Operation .............................................................................. 4
Adjusting the trimmer angle .................................................. 4
Adjusting the cutting height .................................................. 4
Cleaning ............................................................................... 4
Specifications ....................................................................... 4
CE Certificate of conformity .................................................. 8
Fitting
Follow the fitting step by step in figure:
(The actual model can vary from the illustrations shown.)
1.
Identification of the machine
A. Upper handle
B. Angle adjustment
C. Quick fit unit
D. Protective cup
E. Gear housing
F. Cover
G. Trimmer head
2.
Secure the protective guard to the trimmer guard using
bolts.
Follow the procedure shown in illustration 6.
3.
Fit the angle-adjustment handle as shown in illustration 2.
4.
Fit the trimmer line.
Follow the procedure shown in illustration 4.
The trimmer line has a length of 55 cm and must always
be fitted as a set. Two lines must be fitted on each side
of the trimmer head.
Operation
Before use, remove all foreign bodies from the area.
Stone, glass, branches and similar can damage the
machine. At the same time, check that all of the
bolts are secure and tighten if necessary.
Start the engine in accordance with the instructions.
Ensure that you are standing clear of all of the
machine’s moving parts when you start the engine.
Do not move the machine if you are not within the
safety zone while the product is running.
The machine must be switched off when leaving the
safety zone, shown in illustration 7.
ANY PERSON WHO IS NOT OPERATING THE MACHINE
MUST KEEP TO A SAFE DISTANCE OF 10 METRES.
The machine can work in almost any form of vegetation.
The machine’s trimmer head turns clockwise, which means
that the machine ejects material on the right side.
The machine has a low center of gravity and wide wheel
base. This means the machine is suitable for working on
slopes with an incline of up to 15 %. Warning: Work must not
be carried out on slopes with inclines that are greater than
15%, because the engine will lack lubrication and
consequently become damaged.
The machine’s workload should not exceed the trimmer’s
capacity. This is ensured by keeping the trimmer head
always at the same rpm. Avoid the trimmer head losing rpm.
Reduced rpm can be a sign of overloading.
Adjusting the trimmer angle
Follow the adjustment procedure shown in illustration 5.
Adjusting the cutting height
Follow the adjustment procedure shown in illustration 3.
The cutting height of the trimmer head can be adjusted. If the
trimmer line is positioned up, the cutting height is 65 mm and
if the trimmer line is positioned down the cutting height is
35 mm.
Use a 3 mm Allen key.
Cleaning
The machine should be cleaned after use. Use a garden
hose and rinse off soil and dirt. Free the trimmer head from
the shaft and clean off grass residue, etc. Wipe clean the
serial number using a damp cloth, otherwise the serial
number can become damaged. Avoid using a high-pressure
cleaner.
Always dry the trimmer shaft thoroughly after cleaning and
finish by wiping the shaft with oil to minimize corrosion on the
shaft.
Shaft corrosion will lead to difficulties in adjusting the height
of the trimmer head.
Specifications
Working width
Max. 60 cm
Working height
3.5–6.5 cm
Trimmer line
4 mm
Adjustable handle
Yes
Weight
31,4 kg
