manualshive.com logo in svg

Texas Instruments WRL, User Manual, Page: 7 / 22

Share
Download
Texas Instruments WRL User Manual Download Page 7

Texas Weather Instruments, Inc.                       

7

                     WRL Instruction Manual

Press 

select

 a fourth time, and the day of the week is displayed (1 = Sunday, 2 = Monday, 3

= Tuesday, 4 = Wednesday, 5 = Thursday, 6 = Friday, and 7 = Saturday. Press the

maximum

 button to advance the day of the week and 

minimum

 to retard.

Report

Hold

AM

PM

04       

Press 

select

 

a fifth time (note the colon between the hours and minutes), and the unit will

display the time in military hour style. Press the 

maximum

 button to advance the hour or

minimum

 to retard the hour.

Report

Hold

AM

PM

23 :-   -

Press 

select

 a sixth time 

(note the colon between the hours and minutes), 

and the unit will

display minutes. Press the 

maximum

 

or 

minimum

 buttons.

Report

Hold

AM

PM

-   - .42

Press 

select 

a seventh time (note only the right two digits); the unit will display seconds.

Press the maximum

 

or 

minimum

 

buttons to set the seconds. (note: the seconds is updated

on the display only when the maximum or minimum button is being depressed).

Report

Hold

AM

PM

        22

Press 

select

 

an eighth time 

(Note: a single dot at the bottom separates the hour and

minute)

; the lunar/tide clock will display the number of hours in a cycle.

Press the 

maximum

 or 

minimum 

buttons to set the hours of the cycle (explained in the

Lunar Tide section).

Report

Hold

AM

PM

12.-  -

Summary of Contents for WRL























Reviews:

No comments