Texas Weather Instruments, Inc.
12
WRL Instruction Manual
second,
log interval,
determines how often the unit saves data to its internal memory. If the
unit is in protect mode this function is disabled.
Pressing
select
and
average
at the same time puts the unit into print set mode. The unit
first displays the
report interval
in number of hours between lines of printed information.
Press the
maximum
and
minimum
keys to change display.
Pressing
select
a second time displays the number of minutes between lines of
information. Press the
maximum
and
minimum
keys to change the display.
Press
select
a third time, and the minimum/maximum and form feed options 0 through 7
may be selected as illustrated in the table below:
SETTINGMIN/MAX FORM FEED
RAIN RATE
0
OFF
OFF
OFF
1
ON
OFF
OFF
2
OFF
OFF
OFF
3
ON
ON
OFF
4
OFF
OFF
ON
5
ON
OFF
ON
6
OFF
OFF
ON
7
ON
ON
ON
When rain rate is off, term rain is substituted.
Press
select
a fourth time to select the baud rate of the serial output. Press the
maximum
and
minimum
keys to change the display.
Press select a fifth time to select log interval hours. The log interval tells the
Weather
Report
to send data to the internal memory and at which interval to do so. Press the
maximum
or
minimum
to change the display.
Press select a sixth time to select the log interval minutes. Press the
maximum
or
minimum
to change the display.
Press
select
a seventh time, and a number between 0 and 255 appears in the
pressure/humidity window. This number represents
output
options. Enter the proper
option number by pressing the
maximum
or the
minimum
key. The output options control
the selection of such things as AM PM, wind speed knots, auxiliary display and average
wind speed output
. (Look at the first item in the reference section called control options
for more information).
Press select a eighth time and the unit will return to a normal display.