UCD90120/4 EVM GUI Setup
www.ti.com
3
UCD90120/4 EVM GUI Setup
3.1
UCD90120/4 EVM GUI Installation
The UCD90120 and UCD90124 EVMs use the Texas Instruments Fusion Digital Power Designer
graphical user interface (GUI) which may be downloaded from the following web site:
http://focus.ti.com/docs/toolsw/folders/print/fusion_digital_power_designer.html
Place the TI-Fusion-Digital-Power-Designer-zip file in a known location on the PC. Unzip the
TI-Fusion-Digital-Power-Designer-zip file.
Double click the unzipped TI-Fusion-Digital-Power-Designer-exe file. Proceed through the installation by
accepting the installer prompts and the license agreement. Accept the GUI suggested default PC
installation locations to complete the install.
Once the GUI completes the installation it will start. The first time the GUI is launched on a particular PC
the user may be prompted to select a device. Choose UCD9xxx. Afterwards, the GUI may be closed.
Note that the TI-Fusion-Digital-Power-Designer v1.6.105 was used for the examples to be shown later in
the document.
6
Evaluation Module for UCD90120 and UCD90124
SLVU347 – December 2009
Submit Documentation Feedback
Copyright © 2009, Texas Instruments Incorporated
