SLLU131B – July 2010 – Revised February 2011
12-V DC Jack
The DEMO Board can operate from a standard DC jack for connecting an external 12-V wall-wart. The
wall-wart should be rated for 12 V with at least a 2-A current rating. The tip of the DC jack has positive
polarity. A wall-wart is not supplied with this reference design demonstration module, leaving it capable of
bus power mode by default. In this mode, only Solid State Drives will work. If other higher current hard
drives are to be used a wall-wart will have to be used.
7
SLLU131B – July 2010 – Revised February 2011
12-V DC Jack
Submit Documentation Feedback
© 2010–2011, Texas Instruments Incorporated
