DAC and ADC GUI Configuration File Changes When Using a Xilinx Development Platform
20
SLAU580B – June 2014 – Revised September 2016
Copyright © 2014–2016, Texas Instruments Incorporated
TSW14J10 FMC-USB Interposer Card
Open HSDC Pro GUI, select the
DAC
tab, then select
DAC3XJ84_LMF_442
in the device button. After the
firmware is loaded, enter 368.64M in the
Data Rate (SPS)
window, select 2’s Complement in the
DAC
Option
window and generate a 10-MHz test tone using the
IQ Multitone Generator
located in the lower left
of the GUI. Click on the
Create Tones
button. The display appears as shown in
.
Figure 11. HSDC Pro GUI
Click the
Send
button. A new window opens showing the lane rate of the interface and the required
frequency of REFCLK, as shown in
.
Figure 12. HSDC Pro GUI: Lane Rate and REFCLK Settings
Go back to the DAC GUI
Quick Start
tab and click the
Reset DAC JESD Core
button. Click on
Trigger
LMK04828 SYSREF
.
There should now be a 10-MHz tone present at all four DAC EVM outputs.
