manualshive.com logo in svg

Texas Instruments TravelMate 3000 WinSX, User Manual

The Texas Instruments TravelMate 3000 WinSX user manual is an essential guide for maximizing your device's features. Get the manual for free download at manualshive.com. Seamlessly navigate through its functions and optimize your experience with this comprehensive manual, designed to enhance your user experience.

Share
Download
background image

User Features, Page 2

Keyboard

This category specifies the state of the three lock keys and the key repeat rate (also called
the typematic feature) when you turn on the computer.

Caps Lock

This item specifies the power-up state of the Caps Lock key.  The possible settings are On
or Off.  The default setting is Off.

Num Lock

This item specifies the power-up state of the NumLk key (FnF7).  The possible settings
are On or Off.  The default setting is On.

Scroll Lock

This item specifies the power-up state of the ScrLk key.  The possible settings are On or
Off.  The default setting is Off.

Repeat Rate

This item specifies the key repeat ratc-also called the typematic rate-that is, the speed at
which a character repeats on the screen when you press and hold down a key.  The
possible settings are Fast, Slow, and Normal.  The default setting is Normal.

System Configurations

This category specifies various settings concerning the system configuration.

Battery Alarm

This item enables you to turn off the audible alarm that sounds for the low-battery
condition with the computer power on.  The possible settings are On or Off.  The default
setting is On.

4-18 Customizing Your Computer

Summary of Contents for TravelMate 3000 WinSX




























































































































































































































Reviews:

No comments

Related manuals for TravelMate 3000 WinSX

Acer Aspire 1670 Series User Manual preview
Aspire 1670 Series
Brand: Acer Pages: 118
Acer Aspire 1350 Manuel D'Utilisation preview
Aspire 1350
Brand: Acer Pages: 94
Acer AcerNote Nuovo 970 Specifications preview
AcerNote Nuovo 970
Brand: Acer Pages: 4
Acer AcerNote 950 User Manual preview
AcerNote 950
Brand: Acer Pages: 16
Acer 9410-2829 - Aspire Manual Do Utilizador preview
9410-2829 - Aspire
Brand: Acer Pages: 108
Acer Aspire 2000 User Manual preview
Aspire 2000
Brand: Acer Pages: 130
Acer Aspire 1350 User Manual preview
Aspire 1350
Brand: Acer Pages: 93
Acer Aspire 1360 Series User Manual preview
Aspire 1360 Series
Brand: Acer Pages: 104
IBM ThinkPad 770X Supplementary Manual preview
ThinkPad 770X
Brand: IBM Pages: 2
IBM ThinkPad 560Z User Manual preview
ThinkPad 560Z
Brand: IBM Pages: 189
IBM ThinkPad 600 Reference Manual preview
ThinkPad 600
Brand: IBM Pages: 147
EVGA SC17 Gaming Manual preview
SC17 Gaming
Brand: EVGA Pages: 15
EUROCOM D870P MIRAGE Service Manual preview
D870P MIRAGE
Brand: EUROCOM Pages: 96
Monster HUMA H5 V2.1 User Manual preview
HUMA H5 V2.1
Brand: Monster Pages: 74
ASI C15B Service Manual preview
C15B
Brand: ASI Pages: 18
Medion Akoya P7815 Instruction Manual preview
Akoya P7815
Brand: Medion Pages: 90
Acer SF514-56T User Manual preview
SF514-56T
Brand: Acer Pages: 76
Acer SF314-52 User Manual preview
SF314-52
Brand: Acer Pages: 76

Brands by name

Popular brands

Load more brands