Texas Instruments TPS929120EVM, User Manual

Page: 3 / 21

www.ti.com
What You Get
3 SLVUBM2B – April 2019 – Revised December 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
TPS929120EVM User's Guide
1 What You Get
The TPS929120EVM kit ( Figure 1 ) contains:
• USB2ANY
– Ribbon cable
– USB cable
• TPS929120EVM
• TPS929120CANEVM
• DB-09 cable
Figure 1. TPS929120EVM Kit
2 What You Need In Addition
The following additional items are required to run the TPS929120EVM:
• PC with TPS929120EVM GUI installed or to run the on-line TPS929120EVM GUI
• 12-V DC power supply
3 How to Get Started
3.1 Hardware Setup
There are two hardware setups to simulate the communication between MCU and TPS929120-Q1 directly
or through CAN transceiver.
3.1.1 Communication Without CAN Transceiver
Figure 2 shows the hardware setup when TPS929120CANEVM is not used. Figure 3 shows the jumper
configurations for the TPS929120EVM without TPS929120CANEVM connected. This is the default jumper
configuration shipped with the board.