How to Get Started
11
SLVUBM2B – April 2019 – Revised December 2019
Copyright © 2019, Texas Instruments Incorporated
TPS929120EVM User's Guide
In order to connect the GUI to device successfully, you must set the correct device address on the GUI to
map the real device address. See the
for instructions to set the device
address. The default device address setting value of the GUI is 0x01 when you open the GUI.
On the EVM board, the ADDR0, ADDR1 and ADDR2 can be configured as High or Low through "J15",
"J14" and "J13" connectors. On the GUI page you can directly enter the specified value through the
"Device Address" widget.
Figure 12. TPS929120EVM GUI Connection Status
3.4.2
Walkthrough Wizard Prompt
The GUI integrated walkthrough wizard prompts for each page to guide user through the GUI instructions.
After selecting one page, clicking the question mark displays the walkthrough wizard that covers each
control operation method on that page.
Figure 13. Walkthrough Wizard Prompt
