Introduction
3
SBVU040 – February 2018
Copyright © 2018, Texas Instruments Incorporated
TPS7A10EVM-004 Evaluation Module
2
Introduction
Texas Instruments' TPS7A10EVM-004 EVM helps design engineers evaluate the operation and
performance of the TPS7A10 family of linear regulators for possible use in circuit applications. This
particular EVM configuration contains a single linear regulator for handheld systems. The regulator is
capable of delivering up to 300 mA to the load with ultra-low VIN to VOUT dropout voltage. For stability,
use an output capacitor with a value between 2.2 µF and 47 µF.
2.1
Before You Begin
The following warnings and cautions are noted for the safety of anyone using or working close to the
TPS7A10EVM-004. Observe all safety precautions.
Warning
Warning Hot surface. Contact may cause burns. Do not touch.
CAUTION
The circuit module may be damaged by overtemperature. To avoid damage,
monitor the temperature during evaluation and , as needed, for your system
environment cool
CAUTION
Some power supplies can be damaged by application of external voltages. If
using more than one power supply, check your equipment requirements and
use blocking diodes or other isolation techniques, as needed, to prevent
damage to your equipment.
CAUTION
The circuit module is not a finished product or electrical appliance. The module
does not contain current or voltage thresholds for circuit protection. It must be
used by qualified personnel with additional equipment for evaluation only.