![background image](http://html1.mh-extra.com/html/texas-instruments/tps65987ddj/tps65987ddj_user-manual_1095109001.webp)
1
SLVUBQ7 – August 2019
Copyright © 2019, Texas Instruments Incorporated
USB Type-C™ PD TKT Evaluation Module
User's Guide
SLVUBQ7 – August 2019
USB Type-C™ PD TKT Evaluation Module
This user’s guide describes the TPS65987DDJ evaluation module (USB-C-PD-TKT-EVM). The USB-C-
PD-TKT-EVM allows for the evaluation of the TPS65987DDJ Power Delivery (PD). In addition, the EVM
contains a Type-A to USB Type-C converter, a plug-to-receptacle converter, and a passing through board
for debugging purposes. The USB-C-PD-TKT-EVM uses default configurations to allow for sourcing 45 W
or 60 W by simply using a switch. This document contains an introduction, setup conditions, the EVM
schematics, top- and bottom-board layouts and component views, layout, and a bill of materials (BOM).
Figure 1. Front Layout
Figure 2. Back Layout
Trademarks
USB Type-C is a trademark of USB Implementers Forum.
All other trademarks are the property of their respective owners.
1
Introduction
The USB-C-PD-TKT-EVM allows the TPS65987DDJ device to enter default configuration 2 which supports
a 45-W source and default configuration 4 which supports a 60-W source. The USB-C-PD-TKT-EVM
contains a Type-A to USB Type-C converter, a plug-to-receptacle converter, and a passing through board
for debugging purposes.
2
Setup and Switches, Test Points, and LED Descriptions
2.1
LEDs (D1), (D3), (D7), and (D8)
These LEDs highlight if the source board is outputting a 5-V, 9-V, 15-V, or 20-V PD contract respectively.