Texas Instruments TPS65100EVM-030, User Manual, Page: 14 / 25

Input/Output Connect
2-2
2.1 Input/Output Connect
The EVM connection points are described in the following paragraphs.
2.1.1 J1−VIN
This is the positive connection to the input power supply. The leads to the input
supply should be twisted and kept as short as possible.
2.1.2 J2−GND
This is the return connection to the input power supply.
2.1.3 J3−VOUT1
This is the positive output for the main boost convertr of the device.
2.1.4 J4−GND
This is the return connection for the load on the main boost converter of the
device.
2.1.5 J5−VCOM
This is the positive output of the VCOM buffer.
2.1.6 J6−GND
This is the return connection for the load on the VCOM buffer.
2.1.7 J7−VCOMIN
This is the input connection for the VCOM buffer.
2.1.8 J8−VOUT4
This is the output for the 3.3-V linear regulator.
2.1.9 J9−GND
This is the return connection for the load on the linear regulator.
2.1.10 J10−VOUT2
This is the negative output for the inverting charge pump.
2.1.11 J11−GND
This the return connection for the load on the inverting charge pump.
2.1.12 J12−VOUT3
This is the positive output for the positive charge pump.
2.1.13 J13−GND
This the return connection for the load on the positive charge pump.