Texas Instruments TPS6110XEVM-216, User Manual

Page: 9 / 16

2-1 Setup of the EVMs
Setup of the EVMs
It is important to establish all connections to the EVM before the power supply
for the EVM is turned on.
-
Connect a power supply (0.9 V to V
OUT
, depending on the output voltage
of the EVM) to the INPUT header
-
Connect a voltmeter to the OUTPUT header
-
Verify that all jumper s are set to their desired value (EN, ENPB, SKIPEN,
ADEN, LDOEN). Default setting is EN, SKIPEN, ADEN and LDOEN to
V
BAT
and ENPB to GND.
-
Turn on the power supply and verify the output voltage
Topic Page
2.1 Evaluation With the TPS6110x EVM 2-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2