Texas Instruments TPS2595EVM, User Manual

Page: 4 / 18

General Configurations
www.ti.com
4 SLVUB59 – November 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
TPS2595EVM: Evaluation Module for TPS2595xx
4 General Configurations
4.1 Physical Access
Table 2 lists the TPS2595EVM eFuse evaluation board input and output connector functionality. Table 3
describes the test point availability and Table 4 describes the jumper functionality and LED descriptions.
Table 2. Input and Output Connector Functionality
Connector Label Description
T1 CH1, CH2, CH3, CH4 VIN(+), GND(–) Common input for all the four channels
T2
CH1 VOUT1(+), GND(–) Output of CH1
CH2 VOUT2(+), GND(–) Output of CH2
CH3 VOUT3(+), GND(–) Output of CH3
CH4 VOUT4(+), GND(–) Output of CH4
Table 3. Test Points Description
Channel Test Points Label Description
CH1
TP3 VIN Input voltage to the board
TP1 EN/UVLO1 CH1 EN/UVLO setting
TP10 DV/DT1 CH1 output voltage ramp control
TP6 FLTb1 CH1 fault indicator
TP8 ILM1 CH1 load current monitor
TP4 VOUT1 CH1 output voltage
TP13 GND GND
CH2
TP2 EN/UVLO2 CH2 EN/UVLO setting
TP11 DV/DT2 CH2 output voltage ramp control
TP7 FLTb2 CH2 fault indicator
TP9 ILM2 CH2 load current monitor
TP5 VOUT2 CH2 output voltage
TP14 GND GND
CH3
TP19 VIN Input voltage to the board
TP17 EN/UVLO3 CH3 EN/UVLO setting
TP26 DV/DT3 CH3 output voltage ramp control
TP22 FLTb3 CH3 fault indicator
TP24 ILM3 CH3 load current monitor
TP20 VOUT3 CH3 output voltage
TP28 GND GND
CH4
TP18 EN/UVLO4 CH4 EN/UVLO setting
TP27 DV/DT4 CH4 output voltage ramp control
TP23 FLTb4 CH4 fault indicator
TP25 ILM4 CH4 load current monitor
TP21 VOUT4 CH4 output voltage
TP29 GND GND
TP12 P-LOAD Pulsed load ENABLE
TP15 I-LOAD Pulsed load test point
TP16 P-LOAD-RTN Pulsed load return