www.ti.com
General Configurations
•
Set the output load at 100
Ω
on CH1 and then enable the load. Turn on the power supply, Press the
EVM RST switch, S1 and release verify that VOUT1 (TP2) ramps up as
Figure 3
illustrates.
Figure 3. V
OUT
Ramp Up Time for CH1
•
Set the output load at 100
Ω
on CH2 and then enable the load. Turn on the power supply, Press the
EVM RST switch, S2 and release verify that VOUT2 (TP16) ramps up as
Figure 4
shows.
Figure 4. V
OUT
Ramp Up Time for CH2
9
SLVUA44 – June 2014
TPS25940XEVM-635: Evaluation Module for TPS25940X
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated