JP4 to Enabled
JP5 to Enabled, if 5Vg is used
JP6 to Shorted
In this configuration, the device powers up when power is applied.
JP1, JP2 SCR0, SCR1 select how switch pin slew rate is set: slow, medium-slow, medium-fast, or fast. JP3 LPM
selects how Low Power Mode is set: Enabled or Disabled. JP4 EN turns the device on or off. JP5 5Vg turns the
regulated 5-V output on or off. JP6 Bypass disables the low-pass filter located on the input supply to the device.
Setup
SLIU006A – DECEMBER 2011 – REVISED OCTOBER 2022
TPIC74101EVM User's Guide
5
Copyright © 2022 Texas Instruments Incorporated
