1.2
TPA2050D4EVM Specifications
2
Operation
2.1
Quick Start for Stand-Alone Operation
2.1.1
Software Installation Sequence
2.1.2
Evaluation Module Setup
Operation
www.ti.com
VDD
Supply voltage range
–0.3 V to 6 V
IDD
Supply current
1.5 A Maximum
PO
Speaker Continuous output power per channel, 8
Ω
, Vdd = 5 V, THD + N = 1%
1.25 W
Headphone Continuous output power per channel, 16
Ω
, Vdd = 5 V, THD + N = 1%
145 mW
RL
Minimum load impedance (Speaker)
8
Ω
Minimum load impedance (Headphone)
16
Ω
The TPA2050D4EVM can be evaluated in a stand-alone mode or when connected to existing circuits with
I
2
C controls.
A desktop or laptop with Windows™ XP installed is required in the stand-alone operation. Connect the
EVM to a computer with a USB cable. A jumper allows the TPA2050D4 to receive power from either the
USB or an external supply via banana plugs. The inputs accept standard RCA plugs. The speaker output
connection accepts banana plugs. The headphone output connection accepts standard 3.5-mm
headphone plugs.
1. Insert the CD provided.
2. Unzip the files to a temporary folder.
3. Install TPA2050D4 software by executing setup.exe located in
TPA2050D4 Setup
.
Accept license agreement and defaults, and complete installation. Note: you can uninstall later with
Add/Remove Programs. It is unnecessary to repeat the preceding steps, once the software is installed.
1. Configure the jumpers as the following table for a default setting:
Table 1. Jumpers Default Setting
Jumper
Default Setting
JP1 (DVDD)
Shunt
JP2, JP3
Shunt across each other
JP4
Shunt
JP5, JP6, JP7, JP8
As shown in Figure 2
JP9 (USB PWR)
Remove
TPA2050D4EVM Evaluation Module
2
SLOU206 – July 2008
