Installing the Debugger Software
7
Installing the EVM and the Debugger
4
Installing the Debugger Software
This section explains how to install the debugger software on a hard-disk sys-
tem for two different operating systems:
-
DOS
-
Windows 3.1
Installing the debugger on DOS systems
To install the debugger on a DOS system, follow these steps:
1) Insert the debugger CD-ROM into your CD-ROM drive.
2) Change to the CD-ROM drive (replace
d with the letter of your CD-ROM
drive):
d:
3) Enter the following command:
install
4) Follow the on-screen instructions.
Installing the debugger on Windows 3.1 systems
To install the debugger on a Windows 3.1 system, follow these steps:
5) Insert the debugger CD-ROM into your CD-ROM drive.
6) Start Windows 3.1.
7) From the File menu, select Run.
8) In the dialog box, enter the following command (replace
d with the letter
of your CD-ROM drive):
d:\setup.exe
9) Click on OK.
10) Follow the on-screen instructions.