Placing the EVM Board Into Your PC
6
3
Placing the EVM Board Into Your PC
After you have prepared the EVM board for installation, follow these steps to
place it into your PC.
Minimizing Personal Injury
To minimize the risk of personal injury,
always turn off the power
to your PC and unplug the power cord before installing the EVM
board.
Step 1: Turn off your PC’s power and unplug the power cord.
Step 2: Remove the cover of your PC.
Step 3: Remove the mounting bracket from an unused 16-bit slot.
Step 4: Carefully but firmly push the EVM board into a 16-bit slot (see
Figure 2).
Step 5: Return the mounting screw to the mounting bracket and tighten the
screw (see Figure 2).
Step 6: Replace the PC cover.
Step 7: Plug in the power cord for your PC and turn on the PC’s power.
Figure 2. Placing the EVM Board Into Your PC
mounting bracket
EVM board
16-bit slot
rear of computer
mounting screw