TMP102EVM Software
4
TMP102EVM Software
This section discusses how to install the TMP102EVM software.
4.1
Hardware Requirements
The TMP102EVM software has been tested on Microsoft Windows XP operating systems (OS) with United
States and European regional settings. The software should also function on other Windows OS platforms.
4.2
Software Installation
The TMP102EVM software is included on the CD that is shipped with the EVM kit. It is also available
through the
on the TI website. To install the software to a computer, insert the
disc into an available CD-ROM drive. Navigate to the drive contents and open the TMP102EVM software
folder. Locate the compressed file (TMP102EVM.zip) and open it using WinZIP
®
or a similar file
compression program; extract the TMP102EVM files into a specific TMP102EVM folder (for example,
C:\TMP102EVM) on your hard drive.
Once the files are extracted, navigate to the TMP102EVM folder you created on the hard drive. Locate the
setup.exe file and execute it to start the installation. The TMP102 software installer file then begins the
installation process as shown in
Figure 8. TMP102EVM Software Installation
9
SBOU114
–
August 2011
TMP102EVM Evaluation Board and Software Tutorial
Copyright
©
2011, Texas Instruments Incorporated