Texas Instruments TMP102EVM, User Manual, Page: 8 / 22

TMP102EVM Hardware
www.ti.com
3.4 TMP102EVM Features
This section describes some of the hardware features present on the TMP102EVM test board.
3.4.1 I
2
C Test Points
I
2
C test points are included on the TMP102 test board for user convenience. These test points can be
used to monitor the two-wire lines of the I
2
C interface or to run the TMP102 test board externally without
the use of the SM-USB-DIG.
3.4.2 10-Pin Connector Ribbon Extender (Optional)
The TMP102EVM kit ships with an optional ribbon cable for extending the connection between the
SM-USB-DIG and the PCB. This extension cable can be useful if high temperature tests must be run on
the test board, because the SM-USB-DIG is not rated for high temperatures. To connect the ribbon cable,
attach the cable to the EVM and SM-USB-DIG as shown in
Figure 7 .
Figure 7. 10-Pin Ribbon Cable Extender
8 TMP102EVM Evaluation Board and Software Tutorial SBOU114 – August 2011
Submit Documentation Feedback
Copyright © 2011, Texas Instruments Incorporated