C2000™ Systems Applications Collateral
v2.0
8
6) The GUI should auto-detect and connect to your HVDMC Kit. If auto-connect fails you will need to set
up the connection manually. The Connection Wizard is accessed through the Connection menu. Click
on “Connect to engine” to view a list of available targets. Now setup the Connection Wizard Dialog to
match Fig 5. Select Piccolo 28035 from the Target list and Serial for connection method. You will need
to determine the correct COM port number for your system. This can be found by going to Control
Panel->System->Hardware tab->Device Manager->Ports(COM & LPT). And look for the one which is
described as USB Serial Port or similar. Hit Connect once done. Now select the appropriate COM port.
This can be found out by going to
Control Panel->System->Hardware tab->Device Manager->Ports (COM & LPT).
And look for the one which is described as USB Serial Port or similar. Hit OK once done.
Fig5: GUI Setup Connections