www.ti.com
Schematics, Board Layouts, and Bill of Materials
Table 3. HPA358A Bill of Materials (continued)
Count
RefDes
Value
Description
Size
Part Number
MFR
1
--
LED board
HPA357
TI
1
See Note
'F2808 DSP Control Card
TMDSCNCD2808
TI
6
Notes: 1. These assemblies are ESD sensitive, ESD precautions shall be observed.
2. These assemblies must be clean and free from flux and all contaminants. Use of no clean flux is not acceptable.
3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.
4. Ref designators marked with an asterisk ('**') cannot be substituted.
All other components can be substituted with equivalent MFG's components.
5. Install rubber feet at bottom corners of assembled PCB after final wash.
6. DSP Control card will be supplied by TI.
7.
U1 will be programmed after assembly. See test procedure for programming instructions.
SLVU306 – April 2009
TLC5944EVM-358
31
