CHAPTER 7. USING THE TABLE
7.2
The Table Settings
Press
to enter the
TBLSET
screen.
There are four potential settings that you can adjust. The bottom setting,
Independent
, is the most
important.
Independent: Auto or Ask
If this is set to
Auto
, your table will be automatically generated using the other three settings.
If this is set to
Ask
, you will need to enter in each
x
-value one at a time for the table to have any
information.
If you’re using
Auto
, you will need to adjust the following settings:
tblStart
This value will be the first
x
-value used in your table.
∆
tbl
This value is the distance between each
x
-value in the table.
Graph
<
−
>
Table
There are two options, either
ON
or
OFF
.
You will typically want this option to be set to
OFF
.
Make sure you press
twice to save any changes you’ve made. When you do this, you’ll
be taken back to the window you previously were using.
Example:
Set the
TBLSET
settings to the following:
tblStart
:
−
2
∆
tbl
:
1
Graph
: OFF
Independent
: AUTO
Press
twice to make sure the changes are saved. You will be taken back to the
Y=
screen.
38
