Texas Instruments TI-Nspire CAS Page 151 Reference Manual Download

Page: 151 / 276

rotate()

Catalog >

Rotates the bits in a binary integer. You can
enter

Integer1

in any number base; it is

converted automatically to a signed, 64-bit
binary form. If the magnitude of

Integer1

too large for this form, a symmetric modulo
operation brings it within the range. For
more information, see

►

Base2

, page 21.

To see the entire result, press

and then

use

and

to move the cursor.

#ofRotations

is positive, the rotation is to

the left. If

#ofRotations

is negative, the

rotation is to the right. The default is

−

(rotate right one bit).

For example, in a right rotation:

In Hex base mode:

Each bit rotates right.

0b00000000000001111010110000110101

Rightmost bit rotates to leftmost.

produces:

0b10000000000000111101011000011010

The result is displayed according to the
Base mode.

Important:

To enter a binary or

hexadecimal number, always use the 0b or
0h prefix (zero, not the letter O).

rotate(

List1

[

#ofRotations

]

)

⇒

list

Returns a copy of

List1

rotated right or left

#of Rotations

elements. Does not alter

List1

#ofRotations

is positive, the rotation is to

the left. If

#of Rotations

is negative, the

rotation is to the right. The default is

−

(rotate right one element).

In Dec base mode:

rotate(

String1

[

#ofRotations

]

)

⇒

string

Returns a copy of

String1

rotated right or

left by

#ofRotations

characters. Does not

alter

String1

#ofRotations

is positive, the rotation is to

the left. If

#ofRotations

is negative, the

rotation is to the right. The default is

−

(rotate right one character).

Alphabetical Listing

151

Summary of Contents for TI-Nspire CAS





















































































































































































































































































Search results

Summary of Contents for TI-Nspire CAS

Reviews:

Related manuals for TI-Nspire CAS

Brands by name

Popular brands

Texas Instruments TI-Nspire CAS, Reference Manual

Search results

Summary of Contents for TI-Nspire CAS

Reviews:

Related manuals for TI-Nspire CAS

Brands by name

Popular brands