Texas Instruments TI-Nspire CAS Page 148 Reference Manual Download

Page: 148 / 276

148

Alphabetical Listing

RequestStr

Catalog >

Programming command: Operates
identically to the first syntax of the

Request

command, except that the user’s response
is always interpreted as a string. By
contrast, the

Request

command interprets

the response as an expression unless the
user encloses it in quotation marks (““).

Note: You can use the

RequestStr

command

within a user-defined program but not
within a function.

To stop a program that contains a

RequestStr

command inside an infinite loop:

•

Handheld:

Hold down the

key and

press

repeatedly.

•

Windows®:

Hold down the

F12

key and

press

Enter

repeatedly.

•

Macintosh®:

Hold down the

key and

press

Enter

repeatedly.

•

iPad®:

The app displays a prompt. You

can continue waiting or cancel.

Note:

Summary of Contents for TI-Nspire CAS





















































































































































































































































































Search results

Summary of Contents for TI-Nspire CAS

Reviews:

Related manuals for TI-Nspire CAS

Brands by name

Popular brands

Texas Instruments TI-Nspire CAS, Reference Manual

Search results

Summary of Contents for TI-Nspire CAS

Reviews:

Related manuals for TI-Nspire CAS

Brands by name

Popular brands