1.2 inches
J2
J1
20
19
1
2
20
19
1
2
SWRU326-007
www.ti.com
Hardware Setup
2.4
Hardware Setup
Before conducting performance tests, the EM board must be connected to the host platform, either with
the mating connectors (J6 and J7) or the single-row headers (J4 and J5). To use the EM mating
connectors to connect the hardware, the mating EM connector must be lined up and spaced 1.2 inches
apart (see
Figure 2-7
). To use the single-row headers, the required signals from the EM mating
connectors must be wired to the host platform.
Figure 2-7. Host PCB Mating Connector Arrangement
13
SWRU326 – November 2012
CC3000 EM Board
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated