The parts list for the deluxe cable:
Printed-circuit board (PCB)
Enclosure
2.5mm stereo plug (or jack)
DB9 or DB25 female connector
Hook-up wire
Miscellaneous
Any type or wattage of resistor will work, also any
value from 36K to 43K
40kohm, 1/8W, 10%
R5, R6
Any type or wattage of resistor will work, also any
value from 82K to 120K
100kohm, 1/8W, 10%
R1, R2, R3, R4
Any PNP transistor with at least 25V
collector-emitter voltage rating
2N3906
Q3, Q4, Q6, Q7
May also be 2N3904, or any NPN transistor with at
least 25V collector-emitter voltage rating
2N4401
Q1, Q2, Q5, Q8
May also be 1N4148, 1N4004. Not critical.
1N914
D1, D2, D3, D4
Comments
Value
Designator
You can build the deluxe cable with standard parts from Radio Shack, as shown in this table:
5 - 6
Summary of Contents for TI-92+
