Texas Instruments TAS2564, User Manual

Page: 6 / 18

Device Configuration
www.ti.com
6 SLAU812 – July 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
TAS2564YBGEVM-DC User's Guide
4. Set the jumpers at J12 and J13 to the desired I
2
C address as shown in Section 5.2 .
5. Configure PPC3-EVM-MB as described in SLEU120 .
• USB control for I
2
C
• USB control for I2S
• 3.3 V I
2
C
• 3.3 V I2S
• 1.8 V IOVDD
6. Connect a 5 V supply to connector J12 or J11 on PPC3-EVM-MB
7. Connect a Micro USB Cable from PC to PPC3-EVM-MB
8. Verify that TI USB Audio UAC2.0 is the default playback device by opening the sound dialog from the
Windows Control Panel
Figure 5. Windows Playback Devices
9. Set the maximum bit depth using the Texas Instruments USB Audio Device Control Panel found in the
system tray
Figure 6. Texas Instruments USB Audio Device Control Panel
10. Set the sampling rate
• Right click TI USB AUdio UAC2.0
• Select Properties
• Click advanced tab