Stellaris® IDM Single-Board Computer
November 28, 2011
23
To replace the boot loader image or to program example applications into the IDM-SBC using a
Stellaris evaluation board to provide JTAG/SWD functionality:
1.
Install LM Flash Programmer on a Windows PC.
2.
Connect the MDL-ADA2 10-pin to 20-pin adapter (included in the RDK) to the evaluation
board ribbon cable. This converts the standard 20-pin ARM header on the evaluation board to
a fine pitch ARM header.
3.
Carefully connect the socket of the adaptor board to J1 on the IDM.
4.
Apply power to the IDM and connect the evaluation board (available separately) to a USB port.
5.
Run LM Flash Programmer.
6.
In the Configuration Tab use the Quick Set control to select LM39B92.
7.
Move to the Program Tab and click the Browse button. Navigate to the example applications
directory (the default location is “C:\STELLARISWARE\BOARDS\RDK-IDM-SBC).
8.
Each example application has its own directory. Navigate into the example directory that you
wish to load and then into the /gcc directory which contains the binary (*.bin) files. Files named
with a “bl_” prefix are Stellaris boot loader images while those without the prefix are main
application images. Select the binary file and click Open.
9.
Set the “Erase Method” to “Erase Necessary Pages” and check the “Verify After Program” box.
NOTE:
Setting “Erase Entire Flash” when attempting to replace a main application image will
erase the boot loader image and result in a hang when the IDM next boots. If this occurs,
reflash a boot loader image using these instructions.
10.
If flashing a boot loader image, set the “Program Address Offset:” value to 0x0000. If
programming a main application image, set this value to 0x1000.
11.
Next, click on the Program button to start the Erase, Download, and Verify process.
12.
Program execution will start once Verify is complete.
The Debuggers in each of the tool-chains also include Flash programming capabilities, including
support for high-performance in-circuit debug interfaces.
Summary of Contents for Stellaris RDK-IDM-SBC
