manualshive.com logo in svg

Texas Instruments Stellaris EK-LM3S9B92, User Manual, Page: 9 / 33

Share
Download
Texas Instruments Stellaris EK-LM3S9B92 User Manual Download Page 9

January 6, 2010

9

Stellaris® LM3S9B92 Evaluation Kit Overview

Luminary Micro's Stellaris® LM3S9B92 Evaluation Board Kit (EK-LM3S9B92) is a low-cost 
platform for evaluation of the LM3S9B92 microcontroller. The kit includes two boards, the 
EK-LM3S9B92 evaluation board, and the In-Circuit Debug Interface (BD-ICDI) board.

The EK-LM3S9B92 board includes the LM3S9B92 ARM® Cortex™-M3 Microcontroller, a 10/100 
Mbit Ethernet port, a full-speed USB-OTG port, connectors for inteface to the BD-ICDI board, and 
oversized pads for easy connection to the microcontroller GPIO ports.

The BD-ICDI board is a USB full-speed JTAG/SWD debugger board. It includes a USB miniB 
connector for connection to a USB PC port, and two shrouded header connectors for connection to 
the EK-LM3S9B92 board.

Development of software for the EK-LM3S9B92 is simplified by using Luminary Micro's 
comprehensive StellarisWare® peripheral driver library and ARM development tools from our tools 
partners. The Stellaris® LM3S9B92 Evaluation Board Kit includes the two boards described, a 
documentation CD, and cables. All design files are provided on the EK-LM3S9B92 CD.

Figure 1-1.

LM3S9B92 Evaluation Board

Figure 1-2.

In-Circuit Debug Interface Board

C H A P T E R   1

Downloaded from 

Elcodis.com

 

electronic components distributor

 

All manuals and user guides at all-guides.com

Summary of Contents for Stellaris EK-LM3S9B92


































Reviews:

No comments