Software Development
20
January 6, 2010
To program example applications into the EK-LM3S9B92 evaluation board using the ICDI
board:
1.
Install LM Flash Programmer on a Windows PC.
2.
Connect the 10-wire ribbon cable to the 10-pin header on the ICDI board and to the 10-pin
header on the EK-LM3S9B92 board. The red stripe on the ribbon cable should be facing the
bottom of the connectors (see Figure B-5 on page 29).
3.
Connect the 8-wire ribbon cable to the 8-pin header on the ICDI board and to the 8-pin header
on the EK-LM3S9B92 board. The red stripe on the ribbon cable should be facing the bottom of
the connectors (see Figure B-5 on page 29).
4.
Verify that slide switch SW3 on the EK-LM3S9B92 board is set to EXTernal.
5.
Connect the USB cable A-plug to an available port on the PC and the miniB-plug to the ICDI
board.
6.
Verify that POWER LED D1 on the ICDI board is lit and POWER LED D1 on the
EK-LM3S9B92 board is also lit.
7.
Run LM Flash Programmer.
8.
In the Configuration tab, use the Quick Set control to select LM3S9B92 Evaluation Board.
9.
Move to the Program tab and click the Browse button. Navigate to the example applications
directory (the default location is “C:/DriverLib/boards/ek-tempest/).
10. Each example application has its own directory. Navigate into the example directory that you
want to load and then into the directory which contains the binary (*.bin) files. Select the binary
file and click Open.
11. Set the “Erase Method” to “Erase Necessary Pages” and check the “Verify After Program” box.
12. Next, click the Program button to start the Erase, Download and Verify process. The DEBUG
ACTIVE LED (D2) on the ICDI will turn on at this time.
13. Program execution will start once Verify is complete.
The EK-LM3S9B92 design uses a Stellaris® LM3S9B92 microcontroller to handle networking,
USB-OTG, and peripheral functions. The entire circuit is built on a compact four-layer printed
circuit board. All design files are provided on the EK-LM3S9B92 CD.
Downloaded from
Elcodis.com
electronic components distributor
All manuals and user guides at all-guides.com