Introduction
2
SBOU217 – February 2019
Copyright © 2019, Texas Instruments Incorporated
Using the QFN16-DIP-EVM evaluation module
1
Introduction
The QFN16-DIP-EVM is designed to facilitate evaluation of TI quad operational amplifiers (op amps)
offered in the RUM-16 package. This EVM routes each pin of the device to a header pin and can be used
as a basic building block for circuit design and device testing purposes. The EVM has 8 individual adapter
boards available.
2
Hardware Setup
The QFN16-DIP-EVM setup simply requires breaking out one or more PCB from the EVM, then soldering
the IC(s) and terminal strips onto the EVM. This section presents the details of these procedures.
2.1
EVM Assembly Instructions
The following are step-by-step instructions on how to assemble the EVM.
1. Gently flex the PCB panel at the score lines to separate the adapter boards from the EVM.
Figure 2.
