ONET8501P-EV
11.3 GBPS RATE-SELECTABLE LIMITING AMPLIFIER – EVALUATION BOARD
Version 0.4 · October 2007
5
TI CONFIDENTIAL
www.ti.com
JUMPER AND CONNECTOR LOCATION AND DESCRIPTION
The location of all connectors and jumpers are shown
in Figure 3 below.
A description of the jumpers and connectors is given
in Table 1.
Follow the guidelines in the measurement setup
section to quickly get started.
Figure 3: ONET8501-EV Evaluation Board Jumper and Connector Locations
JP1 (Vcc Connection)
JP2 (GND Connection)
DIN+
DIN-
DOUT+
DOUT-
CALOUT-
CALIN-
CALIN+
D8 (LOS indicator)
USB Connector
Reset Button
D7 (Disable indicator)
J14 (Power Selection)