Texas Instruments ONET8501P-EV Manual Download Page 11

 ONET8501P-EV 

11.3 GBPS RATE-SELECTABLE LIMITING AMPLIFIER – EVALUATION BOARD

 

Version 0.4 · October 2007 

 

 

11 

 

www.ti.com 

IMPORTANT NOTICE 

 

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, 
enhancements, improvements, and other changes to its products and services at any time and to discontinue any 
product or service without notice. Customers should obtain the latest relevant information before placing orders 
and should verify that such information is current and complete. All products are sold subject to TI’s terms and 
conditions of sale supplied at the time of order acknowledgment.  

TI warrants performance of its hardware products to the specifications applicable at the time of sale in 
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI 
deems necessary to support this warranty. Except where mandated by government requirements, testing of all 
parameters of each product is not necessarily performed.  

TI assumes no liability for applications assistance or customer product design. Customers are responsible for 
their products and applications using TI components. To minimize the risks associated with customer products 
and applications, customers should provide adequate design and operating safeguards.  

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, 
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process 
in which TI products or services are used. Information published by TI regarding third–party products or services 
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use 
of such information may require a license from a third party under the patents or other intellectual property of the 
third party, or a license from TI under the patents or other intellectual property of TI.  

Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration 
and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this 
information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such 
altered documentation.  

Resale of TI products or services with statements different from or beyond the parameters stated by TI for that 
product or service voids all express and any implied warranties for the associated TI product or service and is an 
unfair and deceptive business practice. TI is not responsible or liable for any such statements.  

 

Mailing Address: 
 
Texas Instruments Post Office Box 655303 Dallas, 
Texas 75265 
 
 
 
Copyright © 2003, Texas Instruments Incorporated 

 
 

Summary of Contents for ONET8501P-EV












Reviews: