Introduction
3
SPRUIL2A – February 2019 – Revised September 2019
Copyright © 2019, Texas Instruments Incorporated
OMAP-L138/C6748 Low-Cost Development Kit (LCDK)
1
Introduction
The LCDK is an easy-to-use, affordable and scalable introduction to the world of TI's C6000 DSP value
line family. Beginners and experienced users alike can use the kit to create low-power and low-cost
solutions for biometrics, analytics, audio, and communications.
TI provides two variants of LCDK, LCDK6748 for DSP only developers and LCDKL138 for Arm
®
and DSP
developers.
For more information, see the following:
•
•
1.1
Features
•
TI TMS320C6748 DSP or OMAP-L138 Application Processor
•
456-MHz C674x Fixed/Floating Point DSP
•
456-MHz ARM926EJ RISC CPU (OMAP-L138 only)
•
On-Chip RTC
•
128 MByte DDR2 SDRAM running at 150 MHz
•
128 MByte 16-bit wide NAND FLASH
•
1 Micro SD/MMC Slot
•
One mini-USB Serial Port (on-board serial to USB)
•
One Fast Ethernet Port (10/100 Mbps) with status LEDs
•
One USB Host port (USB 1.1)
•
One mini-USB on the go (OTG) port (USB 2.0)
•
One SATA Port (3Gbps)
•
One VGA Port (15 pin D-SUB)
•
One LCD Port (Beagleboard XM connectors)
•
One Composite Video Input (RCA Jack)
•
One Leopard Imaging Camera Sensor Input (36-pin ZIP connector)
•
Three AUDIO Ports (1 LINE IN and 1 LINE OUT and 1 MIC IN)
•
14-pin JTAG header (No onboard emulator; external emulator is required)
