Data Preparation of FM Synthesis
B-15
FM Synthesis
byte
PatchMT6i ;Use instrument Metallic tone 6i
to,
*PatchMT6i: Metallic tone 6i, hard metallic sound 1
byte
LOADTIMBRE
byte
X1
byte
X3
byte
28*4
byte
127,120
byte
–24,7
byte
–12,–20
byte
–6,–10
byte
–3,–5
byte
–2,–3
byte
–1,–1
byte
–12,–6
byte
–67,–12
which is the actual parameter for this instrument. All the PatchXXXX state-
ments must be replaced with these parameters for the slave program to run
properly. All the instruments available are listed in the file fm2intr1.inc. The
instruments that match the applications can be selected.
2) For music with only one channel, a file with the following statement,
BYTE
StopSong
can be created for the channel 2 file. Then, go through the same process to
create the FM II data for slave.
B.4.3 Assembler
Once the FM2MERGE program has been used to merge the two channels into
one file, the file can be converted to a binary file by either the ASMX program
or the ASM10 program.
ASMX
[input files] [output file]
ASM10 [input files] [output file]
Summary of Contents for MSP53C391
Page 4: ...iv ...
Page 62: ...C 1 Appendix A Listing of FMequM2 inc Topic Page C 1 Listing of FMequM2 inc C 2 Appendix C ...
Page 78: ...E 1 Appendix A Listing of FM2INTR1 inc Topic Page E 1 Listing of FM2INTR1 inc E 2 Appendix E ...
Page 99: ...MSP53C31 and MSP53C32 Data Sheet F 2 F 1 MSP53C31 and MSP53C32 Data Sheet ...