![background image](http://html.mh-extra.com/html/texas-instruments/msp53c391/msp53c391_user-manual_1097146032.webp)
Master Microprocessor Interface Description
3-6
If the EOS signal is asserted high during the read operation, the end-of-speech
has been reached and a reset operation should be performed prior to sending
new commands or speech data. The reset can be done in one of two ways:
Pulsing the INIT pin low and then waiting for the MSP53C392 to re-initialize
itself or by writing four dummy bytes as described in the following.
RESET Operation
1) Perform a read operation to determine that both the EOS and BUSY sig-
nals are high.
2) If both the EOS and BUSY signals are high, write four bytes of dummy data
to the MSP53C392 by repeating the write operation four times as de-
scribed previously.
Summary of Contents for MSP53C391
Page 4: ...iv ...
Page 62: ...C 1 Appendix A Listing of FMequM2 inc Topic Page C 1 Listing of FMequM2 inc C 2 Appendix C ...
Page 78: ...E 1 Appendix A Listing of FM2INTR1 inc Topic Page E 1 Listing of FM2INTR1 inc E 2 Appendix E ...
Page 99: ...MSP53C31 and MSP53C32 Data Sheet F 2 F 1 MSP53C31 and MSP53C32 Data Sheet ...