11
10
www.ti.com
Demo Examples
6.2
Demo 2: Read or Write LF Transponder (MPT 16/17) – Tab 1
NOTE: See descriptions of positions 1, 2, 3, 4, 5, 7, 8, and 9 in
Figure 10
for additional details.
Figure 11. Read or Write LF Transponder (Type: MPT 16/17)
10
This is the 16/17-page 10-byte data (8-byte data with 2-byte CRC) of the LF Transponder MPT
16/17. Data appears after a successful transponder read.
The Lock column on the right side of the transponder data shows the lock status of every memory
block. To lock the transponder pages, check the Lock box of any page and click Write Tag (see the
description of position 11 for important details of writing to the tag).
Check the Calc CRC box to write 8-byte data (the CRC is calculated by the reader).
Uncheck the Calc CRC box to write 10-byte data (the CRC is not calculated by the reader).
11
Check this box and click Write Tag to write all pages of the MPT 16/17 transponder at one time.
Uncheck this box and click Write Tag to write only the edited page data. If the data has not been
edited, then reader writes the default page 1 data as shown in
Figure 10
.
11
SCBU050 – July 2012
MRD2EVM Microreader Evaluation Kit
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated