manualshive.com logo in svg

Texas Instruments MCF8315EVM, User Manual, Page: 1 / 26

Share
Download
Texas Instruments MCF8315EVM User Manual Download Page 1

User’s Guide

MCF8315EVM Evaluation Module

ABSTRACT

This document is provided with the MCF8315 customer evaluation module (EVM) as a supplement to the 
MCF8315 data sheet (

MCF8315A Three-Phase Sensorless-FOC BLDC Motor Driver

). This User's Guide details 

the hardware implementation of the EVM and how to setup and power the board.

Table of Contents

1 Cautions and Warnings

..........................................................................................................................................................

2

2 Introduction

.............................................................................................................................................................................

3

3 Quick Start Guide

....................................................................................................................................................................

4

4 Hardware and Software Overview

.........................................................................................................................................

5

4.1 Hardware Connections Overview – MCF8315EVM...........................................................................................................

5

4.2 Connection Details.............................................................................................................................................................

5

4.3 MSP430FR2355 Microcontroller & User Interface.............................................................................................................

7

4.4 LED Lights..........................................................................................................................................................................

8

4.5 User-Configurable Settings................................................................................................................................................

9

5 Hardware Setup

.....................................................................................................................................................................

11

6 MCF8315 GUI Application

....................................................................................................................................................

12

6.1 Running the GUI..............................................................................................................................................................

12

6.2 Offline Installer.................................................................................................................................................................

12

7 MSP430FR2355 Interface Firmware

....................................................................................................................................

14

7.1 Downloading Code Composer Studio and Importing MSP430FR2355 Interface Firmware Code...................................

14

7.2 Using the eZ-FET to Program the MSP430FR2355........................................................................................................

14

8 Schematics

............................................................................................................................................................................

16

8.1 Main Supply and Pi Filter.................................................................................................................................................

16

8.2 Connectors and Interface.................................................................................................................................................

16

8.3 USB to UART...................................................................................................................................................................

17

8.4 MCU Programming and Debug........................................................................................................................................

17

8.5 MSP430FR2355 MCU.....................................................................................................................................................

18

8.6 MCF8315 3-Phase Sensorless FOC Integrated Driver....................................................................................................

18

8.7 Buck Regulator.................................................................................................................................................................

19

8.8 Status LEDs.....................................................................................................................................................................

20

8.9 Switches and Speed Input...............................................................................................................................................

20

9 Revision History

...................................................................................................................................................................

20

Trademarks

LaunchPad

™

 is a trademark of Texas Instruments.

All trademarks are the property of their respective owners.

www.ti.com

Table of Contents

SLLU362 – DECEMBER 2022

Submit Document Feedback

MCF8315EVM Evaluation Module

1

Copyright © 2022 Texas Instruments Incorporated

Summary of Contents for MCF8315EVM



























Reviews:

No comments