Texas Instruments LMX2492, User Manual, Page: 16 / 26

Chapter 6
SNAU160C – March 2014 – Revised November 2014
Typical Performance Measurements
6.1 PLL Phase Noise
Figure 6-1. Phase Noise in Default Mode
The above figure shows the phase noise in default for mode. Note that this is ½ the VCO frequency as it
was observed on the Fout/2 output.
16 Typical Performance Measurements SNAU160C – March 2014 – Revised November 2014
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated