GUI Operation
19
SNVU574 – July 2017
Copyright © 2017, Texas Instruments Incorporated
LM36010EVM User Guide
Figure 37. LM36010EVM Information View
3.2
Register View
The register view is shown when “Register” icon is clicked, and it provides the Register values, FieldView
and Description fields. The user can enter the desired hex value to the registers in the “Value” column of
Register values or in the "Value" column of FieldView, or can also perform a bit-wise configuration of any
register fields by double-clicking on the corresponding register bit. "FieldView" displays the description of
all fields of the selected register. Each register can be read independently or all registers can be read at
once by utilizing the “Read” and “Read All” buttons, respectively.
The data is written to the register(s) in one of two ways, depending on the “Update Mode” field selection.
In "Immediate" mode, the register data is written immediately following a “Value”, an individual bit, or a
"Value" change. In “Deferred” mode, the displayed data is written to all registers upon depression of the
“Write” button. The “Read All” button can be pressed to read back all the registers, which updates the
values on the table.
Register settings can be saved to text file format by selecting “Save Registers” from file menu. Text file
format register settings file can be loaded and programmed automatically by selecting “Load Register”
from file menu.