Texas Instruments LM36010EVM User Manual Download

Page: 1 / 29

SNVU574 – July 2017

LM36010EVM User Guide

User's Guide

SNVU574 – July 2017

LM36010EVM User Guide

The Texas Instruments LM36010EVM evaluation module (EVM) helps designers evaluate the operation
and performance of the LM36010 Synchronous-Boost Single-LED Driver with 1.5-A High-Side Current
Source. The device offers configurability via I

C-compatible interface. It can be enabled in flash or torch

mode via the I

C interface or externally using the STROBE pin. The module utilizes one LED (D1)

mounted on the EVM.

The EVM contains one synchronous boost, single-LED flash driver (see

Table 1

Table 1. Device and Package Configurations

FLASH LED DRIVER

DEVICE

PACKAGE

LM36010

0.35-mm pitch 8-pin DSBGA

Contents

Setup

..........................................................................................................................

Software

.......................................................................................................................

GUI Operation

..............................................................................................................

Schematic

...................................................................................................................

Board Layout

................................................................................................................

LM36010EVM Bill of Materials

...........................................................................................

List of Figures

STROBE Jumper Settings

..................................................................................................

VIO Jumper Setting

..........................................................................................................

LED Current Measurements Jumper

......................................................................................

LM36010EVM Jumper Configuration

.....................................................................................

LED Warning

.................................................................................................................

LM36010EVM Test Setup

..................................................................................................

MSP432 LaunchPad Jumper Configuration

..............................................................................

Driver Download Website (Part 1)

.........................................................................................

Driver Download Website (Part 2)

.........................................................................................

U.S. Government Export Approval (Part 1)

..............................................................................

U.S. Government Export Approval (Part 2)

..............................................................................

Driver Download (Part 1)

...................................................................................................

Driver Download (Part 2)

...................................................................................................

Driver Zip Folder

.............................................................................................................

Extract Files

..................................................................................................................

Driver Folder

................................................................................................................

Driver Folder (Inside)

......................................................................................................

Driver Setup

................................................................................................................

Driver License Agreement

................................................................................................

Driver Installation Directory

...............................................................................................

Device Driver Installation (Part 1)

........................................................................................

Device Driver Installation (Part 2)

........................................................................................

Summary of Contents for LM36010EVM






























Search results

Summary of Contents for LM36010EVM

Reviews:

Related manuals for LM36010EVM

Brands by name

Popular brands

Texas Instruments LM36010EVM, User Manual

Search results

Summary of Contents for LM36010EVM

Reviews:

Related manuals for LM36010EVM

Brands by name

Popular brands