Hardware
6
SWRU518D – May 2017 – Revised May 2020
Copyright © 2017–2020, Texas Instruments Incorporated
IWR1443BOOST Evaluation Module mmWave Sensing Solution
2.2
Connecting BoosterPack™ to LaunchPad™ or MMWAVE-DEVPACK
This BoosterPack can be stacked on top of the Launchpad, or the
, using the two
20-pin connectors. The connectors do not have a
key
to prevent the misalignment of the pins or reverse
connection. Therefore, ensure reverse mounting does not take place. On the IWR1443 BoosterPack, we
have provided 3V3 marking near pin 1 (see
). This same marking is provided on compatible
LaunchPads which must aligned before powering up the boards.
Figure 4. 3V3 and 5-V Mark on the LaunchPad™ (White Triangle)
