www.ti.com
Schematic, PCB Layout, and Bill of Materials
4
Schematic, PCB Layout, and Bill of Materials
4.1
Schematic
Figure 2
shows the complete schematic of the INA193 test board. R1 is an optional shunt resistor. R2, R3,
and C1 form the optional input filter. Terminal block J1 allows access to the V+ and GND pins. Terminal
block J2 allows access to the VIN+ and VIN– pins. Terminal block J3 provides two screw terminals
connected to the OUT and GND pins.
Figure 2. INA193 Test-Board Schematic
5
SBOU147 – August 2015
INA193EVM User's Guide
Submit Documentation Feedback
Copyright © 2015, Texas Instruments Incorporated
