4.
After finishing the GUI will Open up and look like this:
5.
To open the GUI in the future simply double click on
the “TCA8424 G.application” file that was unzipped
in step 1.
6.
Selecting the correct COM port (for section 7.8)
a.
Connect the MSP430 launchpad to the EVM as shown below
i.
Connection point is under the board
b.
Connect the launchpad to your PC.
c.
Open up the device manager on your PC and find which of the COM ports is associated with the
launchpad
a.
In my case the com port is COM15 as shown in the below image:
