www.ti.com
GUI Operation
25
SNAU189A – December 2015 – Revised October 2017
Submit Documentation Feedback
Copyright © 2015–2017, Texas Instruments Incorporated
HDC1080EVM User 's Guide
3.6
Streaming Measurement Data
The Sensing Solutions GUI and EVM provide a tool to capture measurement data at rates up to 500Hz.
The section describes how to use the data measurement tools from the "Data Streaming" page accessible
from the GUI menu.
3.6.1
Choosing Graph Units and Visible Channels
Select the drop down menu on top of the y-axis to choose the units of the graph. Available options
include: Temperature and Humidity, and Raw Code.
Figure 34. Selecting the Measurement Units for the Data Streaming Graph
To select which measurements are displayed in the graph, check or uncheck the temperature and relative
humidity boxes shown next to the graph units. Selecting or not selecting the data types only affects the
graph and not the data logged to a file. If a data type is not enabled in the Configuration page it will not
appear on the Data Streaming page.