GUI Operation
3.5
Configuring the Device Using Configuration Page
The Sensing Solutions GUI is capable on configuring the device more intuitively than the direct register
values. The "Configuration" page provides an easy-to-use tool for updating the device configuration and
provides additional information about how the device will perform.
3.5.1
Enabling and Disabling Channel Measurements
The FDC211x and FDC221x devices take measurements in two different modes: repeated single channel
measurement and measuring single channels sequentially. When the device repeatedly measures a single
channel any channel can be selected for measurement. To measure a single channel follow these steps.
1. Select “Repeat single channel measurement” in the “Measurement Settings”
Figure 28. Configuring Device to Repeatedly Measure a Single Channel
2. Choose which channel to measure by clicking the enable check-box of the desired channel (any
channel may be selected)
24
FDC2114 and FDC2214 EVM User’s Guide
SNOU138 – June 2015
Copyright © 2015, Texas Instruments Incorporated
