eZ430-TMS37157 Demo
www.ti.com
Figure 18. RFID Demo Software: Direct Access Mode
Pages that are not locked can be programmed with the Program Page command (see
Figure 19
). Choose
the corresponding page, enter the data (5 bytes, MSB first) and click Program Page.
The status of the programming is displayed next to the data programmed into the EEPROM page. If the
target board is too far away from the base station, a Read Page command may be possible but a Program
Page command may not be executed.
Figure 19. RFID Demo Software: Direct Access Mode, Program Page
20
eZ430-TMS37157 Development Tool
SLAU281B
–
November 2009
–
Revised March 2010
Submit Documentation Feedback
Copyright
©
2009
–
2010, Texas Instruments Incorporated
