eZ430-TMS37157 Demo Software (GUI)
www.ti.com
6.3
eZ430-TMS37157 Demo Software (GUI) Installation
1. Unpack RFID Demo Software.zip.
2. Start the eZ430-TMS37157 Demo Reader Software using the shortcut installed on the desktop.
7
eZ430-TMS37157 Demo Software (GUI)
1. Ensure RFID base station is connected to the host PC.
2. Place the target board in front of the antenna of the RFID base station, the distance should not be
longer than 3 cm to show all functions; in particular, the extended mode requires a high field strength.
3. Start the RFID Demo Software from the PC (see
Figure 14
).
Figure 14. RFID Demo Software: Startup Screen
4. Go to the Com Port tab and choose the right com port for the RFID Base Station (see
Figure 15
). The
base station connects automatically to the right com port on the PC (the right com port can be found as
shown in
Figure 11
).
NOTE:
Connection can be tested by pressing Configuration Push Button on the Demo Mode tab.
The red LED (LED4) flashes on every execution.
16
eZ430-TMS37157 Development Tool
SLAU281B
–
November 2009
–
Revised March 2010
Submit Documentation Feedback
Copyright
©
2009
–
2010, Texas Instruments Incorporated
